Welcome to The Safety Refresh, our monthly educational content series written by the Colorado Avalanche Information Center.
The November 2026 Safety Refresh is made possible by support from Friends of CAIC partner, POC.

Written by: Ron Simenhois, CAIC Northern Mountains Highway Forecaster & Data Scientist
It was two days after the Colorado Avalanche Information Center (CAIC) lowered the avalanche danger from CONSIDERABLE (3 of 5) to MODERATE (2 of 5), and about four days since the last avalanche cycle ended. CAIC's Avalanche Explorer showed fewer but larger avalanches over the previous few days. Forecasters were warning that avalanches were becoming harder to trigger, but those that did release would be larger and more destructive.
As I made my way along the valley floor, I noticed signs of the snowpack settling. The trees were beginning to shed the snow from the previous storm, and settlement cones were forming around small tree trunks. I was thinking about the recent avalanche activity and what it meant for my route-finding decisions that day. One detail stood out: recent avalanches on northeast-facing slopes had released across wide sections of the terrain, starting near ridgelines and leaving long, relatively flat crown faces.
Wide avalanche crowns show how cracks can spread across large sections of a slope.
The observations were adding up. The snowpack was showing signs that cracks could spread easily across a slope, or what avalanche professionals call “high crack propagation propensity.” To understand why that matters, we need to look at how dry slab avalanches release.
A dry slab avalanche typically starts when a skier or rider initiates a crack in a weak layer beneath a cohesive layer of snow. Most cracks go nowhere. But if a crack becomes large enough, it can begin to spread along the weak layer on its own. This is called crack propagation. If the crack spreads far enough on a steep enough slope, the slab breaks loose and slides downhill.
How large a crack needs to be to start propagating on its own helps us understand how likely we are to trigger an avalanche. Knowing how far a crack can propagate helps determine how much of the slope might release and, ultimately, how large the avalanche could become. These two characteristics don't necessarily change at the same rate.
A connected avalanche crown illustrates how a crack can spread across a slope.
Avalanches are typically easier to trigger during or shortly after a storm. As time passes, the snowpack settles, and triggering generally becomes more difficult. The new snow becomes denser and develops into a more cohesive slab. This increasingly stiff slab helps distribute the load from a skier or rider, making it harder to find the right spot to initiate a crack in the weak layer beneath.
But there is another side to this process. As the slab becomes more cohesive, it can also become more effective at transmitting cracks across longer distances. In other words, while initiating a crack may become more difficult, a crack that does begin extending may travel farther.
This combination is particularly important with hard slabs over persistent weak layers. These conditions can allow cracks to propagate over long distances and produce large, destructive avalanches, even when triggering has become relatively difficult.
A thick avalanche crown reveals the cohesive slab that broke loose.
That brings us back to the observations from my tour. I was seeing fewer avalanches, but the ones that had released were larger. The wide, continuous crown faces I was seeing told me that cracks could still spread across large sections of a slope.
Avalanches were becoming harder to trigger, but the potential for larger, more destructive avalanches was increasing.
CAIC communicates these two aspects of avalanche hazard through separate pieces of information: the likelihood of triggering an avalanche and the expected avalanche size. Together, they tell a more complete story than the danger rating alone.
That day was a good reminder of why I look beyond the avalanche danger rating when planning a tour. I want to know not just how likely I am to trigger an avalanche, but how large it could be if I do. A drop from CONSIDERABLE (3 of 5) to MODERATE (2 of 5) may mean avalanches are becoming harder to trigger, but it doesn't necessarily mean they're getting smaller. Sometimes, the opposite is true.
Large avalanche paths are a reminder to consider potential avalanche size, not just how likely one is to release.